01/05
P/N 120413
127
User’s Manual
Run
Banner Engineering Corp.
• Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Run Monitor Tab
-----------------------------------------------------------------------------------------------------
Run Screen Monitor Tab
------------------------------------------------------------------------------------------------------------------
To run an inspection, set Options and preferences, and click the
Start
button. Options are explained in the following table:
Inspection Name (default: Last Saved Inspection)
Displays the filename of the selected inspection.
Display (default: Next)
Next Pass:
Display next passed inspection.
Next Fail:
Display next failed inspection.
Next RT:
Display next remotely-taught inspection.
Next RT Fail:
Display next failed, remotely-taught inspection.
Next:
Display all inspections. The display is updated continuously, but
because of transfer speed limits, not every image will be displayed. For faster
image speed, reduce resolution.
None:
Display not updated.
Capture Control (default: Continuous)
Latched:
The condition set in
Display
(see above) is displayed or latched
until set.
Continuous:
The condition set in
Display
(see above) is displayed.
While running an inspection, the following can be
viewed:
•
Pass and Fail counts
•
The status of inputs, outputs, Product Select
System errors, and whether Sensor is Ready
•
Next Pass, Next Fail, Next Remote Teach, Next
Remote Teach Fail, Next, None
Summary of Contents for PresencePlus P4
