manualshive.com logo in svg

Edge PresencePlus P4, User Manual

Share
Download
Edge PresencePlus P4 User Manual Download Page 11

01/05

P/N 120413

3

User’s Manual

Product Support and Maintenance

Banner Engineering Corp.

•  Minneapolis, MN USA

www.bannerengineering.com • Tel: 763.544.3164

To help Banner better assist you, be ready to provide the following information:

•

PresencePLUS P4 software version (to find version number, click 

Help

 in the Main Menu toolbar and choose 

About

)

•

Operating system of your PC

•

Sensor Model Number and Date Code. Model Number is on top of Sensor, Date Code is either on the bottom or the side.

•

Exact wording of any messages that appeared on your screen

•

A description of what you were doing and what happened

•

A description of how you tried to solve the problem

Warranty

Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or 
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the 
warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty 
is in lieu of any other warranty, either expressed or implied.

Banner Engineering Corp. assumes no liability for damages resulting from the use of this manual.

Content of printed manuals and online help subject to change without notice.

Maintenance

Maintenance tasks include keeping the hardware free of dust and dirt and updating the PresencePLUS P4 software as new 
versions become available.

Cleaning the Sensor

Regularly remove any dust or dirt from the Sensor using a soft cloth. If needed, slightly dampen the cloth with a weak solution of 
neutral detergent. Avoid getting dirt on the imager (the area behind the lens). If the imager is dirty, use anti-static compressed 
air to blow off the dust.

Cleaning the Lens

Regularly remove dust, dirt, or fingerprints from the lens. Use anti-static compressed air to blow off dust. If necessary, use a 
lens cloth and lens cleaner or window cleaner to wipe off remaining debris.

Do not use any other chemicals for cleaning.

Updating the PresencePLUS P4 Software

The current version of PresencePLUS P4 software is available for download from the Banner website. See 

Banner Website

 on 

page 2.

Summary of Contents for PresencePlus P4























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands