Edge-Core VG007, Management Manual, Page: 46 / 86

Wireless Client Mode
4-8
4
• DNS – Displays a configured DNS address and any DNS address assigned by
DHCP (displayed in parenthesis). The DNS IP can only be configured when in
Gateway mode.
• Secondary DNS – Displays a configured secondary DNS address and any
secondary DNS address assigned by DHCP (displayed in parenthesis). The
secondary DNS IP can only be configured when in Gateway mode.
• Connection Type – Displays the connection type for the wireless interface (always
DHCP for Wireless Client mode).
• Release – Releases the current IP address information.
• Reconnect – Initiates a new DHCP client request for an IP address.
LAN – Display system IP settings, as well as DHCP and firewall status:
• IP Address – Displays the LAN port IP address. The IP address can only be
configured when in Gateway mode.
• Subnet Mask – Displays the LAN port subnet mask.
• DHCP Server – Displays the LAN port DHCP server status. Displays “Enable” in
Wireless Client mode. In effect, one DHCP client is supported, but the server and
address pool cannot be configured.
• Firewall – Displays the firewall status. Wireless Client mode does not support any
firewall features.
Information – Displays the number of connected clients as well as the unit’s
hardware and firmware version numbers:
• Connected Clients – Displays the number of connected clients, if any.
• Runtime Code Version – Displays the runtime code version.
• LAN MAC Address – Displays the LAN MAC address.
• WAN MAC Address – Displays WAN MAC address.
• Hardware Version – Displays the hardware version number.