Edge-Core VG007, Management Manual

Page: 40 / 86

Wireless Client Mode
4-2
4
Mode Configuration
When operating in Wireless Client mode, you must set a Service Set Identification
(SSID) to identify the wireless network service to which you want to connect. First
perform a site survey to find nearby available access points, then select the wireless
network service you want to use from the displayed list. If the wireless network uses
WEP security, enter a valid key provided by the service operator.
Figure 4-2. Wireless Client Mode Configuration
Mode Selection – Allows you to select Auto configuration (2 operating modes) or
Manual configuration (3 operating modes). (Default: Auto)
• Auto – The unit automatically selects the operating mode depending on the WAN
port status.
- With no link on the WAN port, the unit starts up in Wireless Client mode.
- With a link on the WAN port, the unit starts up in Gateway mode.
• Manual – Allows you to manually select the mode in which the unit operates:
- Gateway – The unit operates as a secure Internet gateway between a WAN port
connection and a wired LAN or wireless devices.
VoIP Configures VoIP parameters 8-1
SIP Settings Configures SIP parameters 8-2
Advanced Setting Configures call forwarding, and DTMF parameters 8-3
Table 4-1. Wireless Client Configuration Options
Menu Description Page