Edge-Core ES4524M-PoE, Management Manual, Page: 86 / 560

Configuring the Switch
3-42
Web – Click SNMP, Configuration. Enter the IP address and community string for
each management station that will receive trap messages, specify the UDP port,
trap version, trap security level (for v3 clients), trap inform settings (for v2c/v3
clients), and then click Add. Select the trap types required using the check boxes for
Authentication and Link-up/down traps, and then click Apply.
Figure 3-23 Configuring SNMP Trap Managers
CLI – This example adds a trap manager and enables authentication traps.
Console(config)#snmp-server host 10.1.19.23 inform private
version 2c udp-port 160 4-64
Console(config)#snmp-server enable traps authentication 4-66
Console(config)#