Edge-Core ES3510MA-DC, Management Manual, Page: 965 / 1098

C
HAPTER
40
| CFM Commands
– 965 –
ethernet cfm ais
period
This command configures the interval at which AIS information is sent. Use
the no form to restore the default setting.
S
YNTAX
ethernet cfm ais period period md domain-name ma ma-name
no ethernet cfm ais period md domain-name ma ma-name
period – The interval at which AIS information is sent.
(Options: 1 second, 60 seconds)
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name. (Range: 1-45
alphanumeric characters)
D
EFAULT
S
ETTING
1 second
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
This example sets the interval for sending frames with AIS information at
60 seconds.
Console(config)#ethernet cfm ais period 60 md voip ma rd
Console(config)#
ethernet cfm ais
suppress alarm
This command suppresses sending frames containing AIS information
following the detection of defect conditions. Use the no form to restore the
default setting.
S
YNTAX
[ no ] ethernet cfm ais suppress alarm md domain-name
ma ma-name
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name. (Range: 1-45
alphanumeric characters)
D
EFAULT
S
ETTING
Suppression is disabled
C
OMMAND
M
ODE
Global Configuration