Edge-Core ES3510MA-DC, Management Manual, Page: 898 / 1098

C
HAPTER
38
| Multicast Filtering Commands
IGMP Snooping
– 898 –
E
XAMPLE
Console(config)#ip igmp snooping priority 6
Console(config)#
R
ELATED
C
OMMANDS
show ip igmp snooping (912)
ip igmp snooping
proxy-reporting
This command enables IGMP Snooping with Proxy Reporting. Use the no
form to restore the default setting.
S
YNTAX
[ no ] ip igmp snooping proxy-reporting
ip igmp snooping vlan vlan-id proxy-reporting { enable | disable }
no ip igmp snooping vlan vlan-id proxy-reporting
vlan-id - VLAN ID (Range: 1-4093)
enable - Enable on the specified VLAN.
disable - Disable on the specified VLAN.
D
EFAULT
S
ETTING
Global: Enabled
VLAN: Based on global setting
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
When proxy reporting is enabled with this command, the switch
performs “IGMP Snooping with Proxy Reporting” (as defined in DSL
Forum TR-101, April 2006), including last leave, and query
suppression. Last leave sends out a proxy query when the last member
leaves a multicast group, and query suppression means that neither
specific queries nor general queries are forwarded from an upstream
multicast router to hosts downstream from this device.
◆
If the IGMP proxy reporting is configured on a VLAN, this setting takes
precedence over the global configuration.
E
XAMPLE
Console(config)#ip igmp snooping proxy-reporting
Console(config)#