Edge-Core ES3510MA-DC, Management Manual, Page: 819 / 1098

C
HAPTER
34
| ERPS Commands
– 819 –
meg-level
This command sets the Maintenance Entity Group level for a ring. Use the
no form to restore the default setting.
S
YNTAX
meg-level level
level - The maintenance entity group (MEG) level which provides a
communication channel for ring automatic protection switching
(R-APS) information. (Range: 0-7)
D
EFAULT
S
ETTING
1
C
OMMAND
M
ODE
ERPS Configuration
C
OMMAND
U
SAGE
This parameter is used to ensure that received R-APS PDUs are directed for
this ring. A unique level should be configured for each local ring if there are
many R-APS PDUs passing through this switch.
E
XAMPLE
Console(config-erps)#meg-level 00-12-CF-61-24-2D
Console(config-erps)#
node-id
This command sets the MAC address for a ring node. Use the no form to
restore the default setting.
S
YNTAX
node-id mac-address
mac-address – A MAC address unique to the ring node. The MAC
address must be specified in the format xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxx.
D
EFAULT
S
ETTING
CPU MAC address
C
OMMAND
M
ODE
ERPS Configuration
C
OMMAND
U
SAGE
The ring node identifier is informational, and does not affect ring protection
switching operations. It may be used for debugging, such as to distinguish
messages when a node is connected to more than one ring.