Edge-Core ES3510MA-DC, Management Manual, Page: 807 / 1098

C
HAPTER
33
| Spanning Tree Commands
– 807 –
E
XAMPLE
Console#spanning-tree protocol-migration eth 1/5
Console#
show spanning-tree
This command shows the configuration for the common spanning tree
(CST), for all instances within the multiple spanning tree (MST), or for a
specific instance within the multiple spanning tree (MST).
S
YNTAX
show spanning-tree [ interface | mst instance-id ]
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
instance-id - Instance identifier of the multiple spanning tree.
(Range: 0-4094, no leading zeroes)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
Use the show spanning-tree command with no parameters to display
the spanning tree configuration for the switch for the Common
Spanning Tree (CST) and for every interface in the tree.
◆
Use the show spanning-tree interface command to display the
spanning tree configuration for an interface within the Common
Spanning Tree (CST).
◆
Use the show spanning-tree mst command to display the spanning
tree configuration for all instances within the Multiple Spanning Tree
(MST), including global settings and settings for active interfaces.
◆
Use the show spanning-tree mst instance-id command to display the
spanning tree configuration for an instance within the Multiple
Spanning Tree (MST), including global settings and settings for all
interfaces.
◆
For a description of the items displayed under “Spanning-tree
information,” see "Configuring Global Settings for STA" on page 207 .
For a description of the items displayed for specific interfaces, see
"Displaying Interface Settings for STA" on page 217 .