Edge-Core ES3510MA-DC, Management Manual, Page: 771 / 1098

C
HAPTER
31
| Automatic Traffic Control Commands
– 771 –
auto-traffic-control
auto-control-release
This command automatically releases a control response after the time
specified in the auto-traffic-control release-timer command has expired.
S
YNTAX
auto-traffic-control { broadcast | multicast }
auto-control-release
broadcast
- Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
This command can be used to automatically stop a control response after
the specified action has been triggered and the release timer has expired.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast auto-control-release
Console(config-if)#
auto-traffic-control
control-release
This command manually releases a control response.
S
YNTAX
auto-traffic-control { broadcast | multicast } control-release
broadcast - Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
This command can be used to manually stop a control response any time
after the specified action has been triggered.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast control-release interface
ethernet 1/1
Console#(config-if)