Edge-Core ES3510MA-DC, Management Manual, Page: 753 / 1098

C
HAPTER
29
| Port Mirroring Commands
Local Port Mirroring Commands
– 753 –
show port monitor
This command displays mirror information.
S
YNTAX
show port monitor [ interface | vlan vlan-id |
mac-address mac-address ]
interface - ethernet unit / port (source port)
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
vlan-id - VLAN ID (Range: 1-4093)
mac-address - MAC address in the form of xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxx.
D
EFAULT
S
ETTING
Shows all sessions.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
This command displays the currently configured source port, destination
port, and mirror mode (i.e., RX, TX, RX/TX).
E
XAMPLE
The following shows mirroring configured from port 6 to port 5:
Console(config)#interface ethernet 1/5
Console(config-if)#port monitor ethernet 1/6
Console(config-if)#end
Console#show port monitor
Port Mirroring
-------------------------------------
Destination Port (listen port):Eth1/5
Source Port (monitored port) :Eth1/6
Mode :RX/TX
Console#