Edge-Core ES3510MA-DC, Management Manual, Page: 566 / 1098

C
HAPTER
21
| System Management Commands
Switch Clustering
– 566 –
cluster member
This command configures a Candidate switch as a cluster Member. Use the
no form to remove a Member switch from the cluster.
S
YNTAX
cluster member mac-address mac-address id member-id
no cluster member id member-id
mac-address - The MAC address of the Candidate switch.
member-id - The ID number to assign to the Member switch.
(Range: 1-36)
D
EFAULT
S
ETTING
No Members
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
The maximum number of cluster Members is 36.
◆
The maximum number of cluster Candidates is 100.
E
XAMPLE
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#
rcommand
This command provides access to a cluster Member CLI for configuration.
S
YNTAX
rcommand id member-id
member-id - The ID number of the Member switch.
(Range: 1-36)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
This command only operates through a Telnet connection to the
Commander switch. Managing cluster Members using the local console
CLI on the Commander is not supported.
◆
There is no need to enter the username and password for access to the
Member switch CLI.