Edge-Core ES3510MA-DC, Management Manual, Page: 414 / 1098

C
HAPTER
15
| Basic Administration Protocols
Remote Monitoring
– 414 –
C
ONFIGURING
RMON
S
TATISTICAL
S
AMPLES
Use the Administration > RMON (Configure Interface - Add - Statistics)
page to collect statistics on a port, which can subsequently be used to
monitor the network for common errors and overall traffic rates.
CLI R
EFERENCES
◆
"Remote Monitoring Commands" on page 589
C
OMMAND
U
SAGE
◆
If statistics collection is already enabled on an interface, the entry must
be deleted before any changes can be made.
◆
The information collected for each entry includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, CRC alignment errors, jabbers, fragments,
collisions, drop events, and frames of various sizes.
P
ARAMETERS
These parameters are displayed:
◆
Port – The port number on the switch.
◆
Index - Index to this entry. (Range: 1-65535)
◆
Owner - Name of the person who created this entry. (Range: 1-127
characters)
W
EB
I
NTERFACE
To enable regular sampling of statistics on a port:
1.
Click Administration, RMON.
2.
Select Configure Interface from the Step list.
3.
Select Add from the Action list.
4.
Click Statistics.
5.
Select a port from the list as the data source.
6.
Enter an index number, and the name of the owner for this entry
7.
Click Apply