Edge-Core ES3510MA-DC, Management Manual, Page: 107 / 1098

C
HAPTER
4
| Basic Management Tasks
Managing System Files
– 107 –
2.
Select Copy from the Action list.
3.
Select Running-Config from the Copy Type list.
4.
Select the current startup file on the switch to overwrite or specify a
new file name.
5.
Then click Apply.
Figure 8: Saving the Running Configuration
If you replaced a file currently used for startup and want to start using the
new file, reboot the system via the System > Reset menu.
S
ETTING
T
HE
S
TART
-
U
P
F
ILE
Use the System > File (Set Start-Up) page to specify the firmware or
configuration file to use for system initialization.
CLI R
EFERENCES
◆
"whichboot" on page 531
◆
"boot system" on page 526
W
EB
I
NTERFACE
To set a file to use for system initialization:
1.
Click System, then File.
2.
Select Set Start-Up from the Action list.
3.
Mark the operation code or configuration file to be used at startup
4.
Then click Apply.