Edge-Core ES3510MA-DC, Management Manual, Page: 1056 / 1098

C
HAPTER
44
| IP Interface Commands
IPv6 Interface
– 1056 –
C
OMMAND
U
SAGE
◆
The time limit configured by this command allows the switch to detect
unavailable neighbors.
E
XAMPLE
The following sets the reachable time for a remote node to 1000
milliseconds:
Console(config)#interface vlan 1
Console(config)#pv6 nd reachable-time 1000
Console(config)#
clear ipv6 neighbors
This command deletes all dynamic entries in the IPv6 neighbor discovery
cache.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
The following deletes all dynamic entries in the IPv6 neighbor cache:
Console#clear ipv6 neighbors
Console#
show ipv6
neighbors
This command displays information in the IPv6 neighbor discovery cache.
S
YNTAX
show ipv6 neighbors [ vlan vlan-id | ipv6-address ]
vlan-id - VLAN ID (Range: 1-4093)
ipv6-address - The IPv6 address of a neighbor device. You can
specify either a link-local or global unicast address formatted
according to RFC 2373 “IPv6 Addressing Architecture,” using 8
colon-separated 16-bit hexadecimal values. One double colon may
be used in the address to indicate the appropriate number of zeros
required to fill the undefined fields.
D
EFAULT
S
ETTING
All IPv6 neighbor discovery cache entries are displayed.
C
OMMAND
M
ODE
Privileged Exec