– 1 –
Q u i c k S t a r t G u i d e
1. Unpack the AP and Check Contents
ECWO7211-L / ECWO7220-L
802.11a/ac/b/g/n
Wireless Access Point
Wall/pole-mounting bracket arm
Pole-mounting bracket
Four expansion bolts with nuts and washers
Long bolt with nut and washers
Two steel-band clamps
Ground wire
Two weatherproof RJ-45 port covers
Documentation—
Quick Start Guide
(this document)
and
Safety and Regulatory Information
Note:
For safety and regulatory information, refer to the
Safety and Regulatory Information
document included with
the AP.
2. Mount the AP
The AP can be mounted on a wall, or pole.
a. Mounting on a Wall
Drill four holes in the wall deep enough for the included wall
expansion bolts. Insert the four bolts in the holes leaving the
threaded part exposed.
Place the wall-mount bracket over the four bolts and use the
nuts and washers to secure the bracket to the wall.
Slide the AP onto the bracket arm and secure it using the
included long bolt, nut, and washer.
b. Mounting on a Pole
Secure the two mounting bracket parts to the pole using the
two included steel-band clamps.
Slide the AP onto the bracket arm and secure it using the
included long bolt, nut, and washer.
3. Ground the AP
Ground the AP by connecting the included ground wire to
the grounding point on the AP and to nearby good earth
connection.
2
1
1
3
1
2
3
1
2
2
1
2
1
1
E042016-CS-R01
150200001440A
www.edge-core.com
802.11a/ac/b/g/n Outdoor Wireless Access Point
ECWO7211-L / ECWO7220-L
