Chapter 1
| Introduction
Setup Wizard
– 15 –
Setup Wizard
The Setup Wizard is designed to help you configure the basic settings required to
get the AP up and running.
Step 1
Select Your Country – Select the access point’s country of operation from the drop-
down menu. You must set the AP’s country code to be sure that the radios operate
according to permitted local regulations. That is, setting the country code restricts
operation of the AP to the radio channels and transmit power levels permitted for
wireless networks in the specified country.
Figure 2: Select Your Country
Caution:
You must set the country code to the country of operation. Setting the
country code ensures that the radios operate within the local regulations specified
for wireless networks.
Note:
The country code selection is for non-US models only and is not available to
all US models. Per FCC regulation, all Wi-Fi products marketed in the US must be
fixed to US operation channels only.
Summary of Contents for ECWO3220
Page 10: ...Tables 10 ...
Page 66: ...ECWO Series E072014 ST R01 ...