Edge-Core ECS4660-28F, Management Manual, Page: 974 / 2020

C
HAPTER
24
| System Management Commands
Precision Time Protocol
– 974 –
show ptp
configuration
This command shows PTP configuration settings.
S
YNTAX
show ptp configuration [ interface ]
interface
ethernet unit / port-list
unit - Stack unit. (Range: 1)
port-list - Physical port number or list of port numbers.
Separate nonconsecutive port numbers with a comma and
no spaces; or use a hyphen to designate a range of port
numbers. (Range: 1-28)
port-channel channel-id (Range: 1-8)
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show ptp configuration ethernet 1/1
Ethernet : 1/1
Delay Mechanism : Peer-to-Peer
Transport : Ethernet
Log Sync Interval : 0
Log Annouce Interval : 1
Announce Receipt Timeout : 3
Log Min Pdelay Req. Interval : 0
Log Min Delay Req. Interval : 0
Console(config-if)#
show ptp
foreign-master
This command shows PTP announcements from neighbors.
S
YNTAX
show ptp foreign-master interface
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
C
OMMAND
M
ODE
Privileged Exec