Edge-Core ECS4660-28F, Management Manual, Page: 714 / 2020

C
HAPTER
17
| IP Services
Domain Name Service
– 714 –
C
OMMAND
U
SAGE
◆
To enable DNS service on this switch, enable domain lookup status, and
configure one or more name servers (see "Configuring a List of Name
Servers" on page 716 ).
P
ARAMETERS
These parameters are displayed:
◆ Domain Lookup – Enables DNS host name-to-address translation.
(Default: Disabled)
◆ Default Domain Name – Defines the default domain name appended
to incomplete host names. Do not include the initial dot that separates
the host name from the domain name.
(Range: 1-127 alphanumeric characters)
W
EB
I
NTERFACE
To configure general settings for DNS:
1.
Click IP Service, DNS.
2.
Select Configure Global from the Action list.
3.
Enable domain lookup, and set the default domain name.
4.
Click Apply.
Figure 415: Configuring General Settings for DNS
C
ONFIGURING A
L
IST
OF
D
OMAIN
N
AMES
Use the IP Service > DNS - General (Add Domain Name) page to configure
a list of domain names to be tried in sequential order.
CLI R
EFERENCES
◆
"ip domain-list" on page 1615
◆
"show dns" on page 1621
C
OMMAND
U
SAGE
◆
Use this page to define a list of domain names that can be appended to
incomplete host names (i.e., host names passed from a client that are
not formatted with dotted notation).