Edge-Core ECS4660-28F, Management Manual, Page: 1510 / 2020

C
HAPTER
43
| Multicast Filtering Commands
MVR for IPv6
– 1510 –
show mvr6
members
This command shows information about the current number of entries in
the forwarding database, or detailed information about a specific multicast
address.
S
YNTAX
show mvr6 [ domain domain-id ] members [ ip-address ]
domain-id - An independent multicast domain. (Range: 1-5)
ip-address - IPv6 address for an MVR multicast group.
D
EFAULT
S
ETTING
Displays configuration settings for all domains and all forwarding entries.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
The following shows information about the number of multicast forwarding
entries currently active in domain 1:
Console#show mvr6 domain 1 members
MVR6 Domain : 1
MVR6 Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
------------------------------ ---- ----------- ----------- ------ --------
FF00::1 1 2(P)
1 Eth1/ 1(S)
2 Eth1/ 2(S)
Console#
The following example shows detailed information about a specific
multicast address:
Console#show mvr6 domain 1 members ff00::1
MVR6 Domain : 1
MVR6 Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of ports join the group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
------------------------------ ---- ----------- ----------- ------ --------
FF00::1 1 2(P)
1 Eth1/ 1(S)
2 Eth1/ 2(S)
Console#