Edge-Core ECS4660-28F, Management Manual, Page: 1492 / 2020

C
HAPTER
43
| Multicast Filtering Commands
MVR for IPv4
– 1492 –
show mvr members
This command shows information about the current number of entries in
the forwarding database, detailed information about a specific multicast
address, the IP address of the hosts subscribing to all active multicast
groups, or the multicast groups associated with each port.
S
YNTAX
show mvr [ domain domain-id ] members [ ip-address |
host-ip-address [ interface ] | sort-by-port [ interface ]]]
domain-id - An independent multicast domain. (Range: 1-5)
ip-address - IPv4 address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
members - The multicast groups assigned to the MVR VLAN.
host-ip-address - The subscriber IP addresses.
sort-by-port - The multicast groups associated with an interface.
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-8)
D
EFAULT
S
ETTING
Displays configuration settings for all domains and all forwarding entries.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
The following shows information about the number of multicast forwarding
entries currently active in domain 1:
Console#show mvr domain 1 members
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
--------------- ---- ----------- ----------- ------ --------
234.5.6.7 1 00:00:09:17 2(P)
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#