Edge-Core ECS4660-28F, Management Manual, Page: 1179 / 2020

C
HAPTER
30
| Access Control Lists
MAC ACLs
– 1179 –
◆
A detailed listing of Ethernet protocol types can be found in RFC 1060.
A few of the more common types include the following:
■
0800 - IP
■
0806 - ARP
■
8137 - IPX
E
XAMPLE
This rule permits packets from any source MAC address to the destination
address 00-e0-29-94-34-de where the Ethernet type is 0800.
Console(config-mac-acl)#permit any host 00-e0-29-94-34-de ethertype 0800
Console(config-mac-acl)#
R
ELATED
C
OMMANDS
access-list mac (1176)
Time Range (957)
mac access-group
This command binds a MAC ACL to a port. Use the no form to remove the
port.
S
YNTAX
mac access-group acl-name { in | out }
[ time-range time-range-name ] [ counter ]
no mac access-group acl-name { in | out }
acl-name – Name of the ACL. (Maximum length: 16 characters)
in – Indicates that this list applies to ingress packets.
out – Indicates that this list applies to egress packets.
time-range-name - Name of the time range. (Range: 1-30
characters)
counter – Enables counter for ACL statistics.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
If an ACL is already bound to a port and you bind a different ACL to it, the
switch will replace the old binding with the new one.
E
XAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#