Edge-Core ECS4660-28F, Management Manual, Page: 1080 / 2020

C
HAPTER
28
| Authentication Commands
Management IP Filter
– 1080 –
show management
This command displays the client IP addresses that are allowed
management access to the switch through various protocols.
S
YNTAX
show management { all-client | http-client | snmp-client |
telnet-client }
all-client - Displays IP addresses for all groups.
http-client - Displays IP addresses for the web group.
snmp-client - Displays IP addresses for the SNMP group.
telnet-client - Displays IP addresses for the Telnet group.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show management all-client
Management Ip Filter
HTTP-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19 192.168.1.19
2. 192.168.1.25 192.168.1.30
SNMP-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19 192.168.1.19
2. 192.168.1.25 192.168.1.30
TELNET-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19 192.168.1.19
2. 192.168.1.25 192.168.1.30
Console#