Edge-Core ECS4310-18T, Installation Manual

Page: 42 / 74

C
HAPTER
3
| Installing the Switch
Mounting
– 42 –
3.
If installing a single switch only, turn to “Connecting to a Power Source” on
page 44 .
4.
If installing multiple switches, mount them in the rack, one below the other,
in any order.
D
ESKTOP OR
S
HELF
M
OUNTING
1.
Attach the four adhesive feet to the bottom of the first switch.
Figure 12: Attaching the Adhesive Feet
2.
Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
3.
If installing a single switch only, go to “Connecting to a Power Source” on
page 44 .
4.
If installing multiple switches, attach four adhesive feet to each one. Place
each device squarely on top of the one below, in any order.