manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 829 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 829

Chapter 28

  |  Domain Name Service Commands

–  829  –

ip domain-lookup

This command enables DNS host name-to-address translation. Use the 

no

 form to 

disable DNS.

Syntax 

[

no

] 

ip domain-lookup

Default Setting 

Disabled

Command Mode 

Global Configuration

Command Usage 

◆

At least one name server must be specified before DNS can be enabled. 

◆

If one or more name servers are configured, but DNS is not yet enabled and the 
switch receives a DHCP packet containing a DNS field with a list of DNS servers, 
then the switch will automatically enable DNS host name-to-address 
translation.

◆

If all name servers are deleted, DNS will automatically be disabled.

Example

This example enables DNS and then displays the configuration.

Console(config)#ip domain-lookup

Console(config)#end

Console#show dns

Domain Lookup Status:

    DNS Enabled

Default Domain Name:

    sample.com

Domain Name List:

    sample.com.jp

    sample.com.uk

Name Server List:

    192.168.1.55

    10.1.0.55

Console#

Related Commands 

ip domain-name (830)
ip name-server (831)

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments