Edge-Core ECS4120-28F, Reference Manual, Page: 643 / 938

Chapter 24
| Multicast Filtering Commands
IGMP Snooping
– 643 –
Command Mode
Global Configuration
Command Usage
◆
When proxy reporting is enabled with this command, the switch performs
“IGMP Snooping with Proxy Reporting” (as defined in DSL Forum TR-101, April
2006), including last leave, and query suppression. Last leave sends out a proxy
query when the last member leaves a multicast group, and query suppression
means that specific queries are not forwarded from an upstream multicast
router to hosts downstream from this device.
◆
If the IGMP proxy reporting is configured on a VLAN, this setting takes
precedence over the global configuration.
Example
Console(config)#ip igmp snooping proxy-reporting
Console(config)#
ip igmp snooping
querier
This command enables the switch as an IGMP querier. Use the no form to disable it.
Syntax
[ no ] ip igmp snooping querier
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆
IGMP snooping querier is not supported for IGMPv3 snooping (see ip igmp
snooping version ).
◆
If enabled, the switch will serve as querier if elected. The querier is responsible
for asking hosts if they want to receive multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#