Edge-Core ECS4120-28F, Reference Manual, Page: 636 / 938

Chapter 23
| Quality of Service Commands
– 636 –
◆
The switch does not allow a policy map to be bound to an interface for egress
traffic.
Example
This example applies a service policy to an ingress interface.
Console(config)#interface ethernet 1/1
Console(config-if)#service-policy input rd-policy
Console(config-if)#
show class-map
This command displays the QoS class maps which define matching criteria used for
classifying traffic.
Syntax
show class-map [ class-map-name ]
class-map-name - Name of the class map. (Range: 1-32 characters)
Default Setting
Displays all class maps.
Command Mode
Privileged Exec
Example
Console#show class-map
Class Map match-any rd-class#1
Description:
Match IP DSCP 10
Match access-list rd-access
Match IP DSCP 0
Class Map match-any rd-class#2
Match IP Precedence 5
Class Map match-any rd-class#3
Match VLAN 1
Console#
show policy-map
This command displays the QoS policy maps which define classification criteria for
incoming traffic, and may include policers for bandwidth limitations.
Syntax
show policy-map [ policy-map-name [ class class-map-name ]]
policy-map-name - Name of the policy map. (Range: 1-32 characters)
class-map-name - Name of the class map. (Range: 1-32 characters)