manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 615 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 615

Chapter 22

  |  Class of Service Commands

Priority Commands (Layer 3 and 4)

–  615  –

show qos map

cos-dscp

This command shows ingress CoS/CFI to internal DSCP map.

Syntax 

show qos map cos-dscp interface

 

interface

interface

 

ethernet

 

unit

/

port

 

unit

 - Unit identifier. (Range: 1) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

Command Mode

Privileged Exec

Example 

Console#show qos map cos-dscp interface ethernet 1/5

  CoS Information of Eth 1/5

 CoS-DSCP map.(x,y),x: phb,y: drop precedence:

 CoS  : CFI  0          1

 ---------------------------------

 0            (0,0)       (0,0)

 1            (1,0)       (1,0)

 2            (2,0)       (2,0)

 3            (3,0)       (3,0)

 4            (4,0)       (4,0)

 5            (5,0)       (5,0)

 6            (6,0)       (6,0)

 7            (7,0)       (7,0)

Console#

show map default-

drop-precedence

This command shows the per-hop behavior to default drop precedence for 
untagged ingress packets.

Syntax 

show qos map default-drop-precedence interface

 

interface

interface

 

ethernet

 

unit

/

port

 

unit

 - Stack unit. (Range: 1) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

Command Mode 

Privileged Exec

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments