manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 520 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 520

Chapter 19

  |  Spanning Tree Commands

–  520  –

spanning-tree

protocol-migration

This command re-checks the appropriate BPDU format to send on the selected 
interface. 

Syntax 

spanning-tree

 

protocol-migration 

interface

interface

 

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

Command Mode 

Privileged Exec

Command Usage 

If at any time the switch detects STP BPDUs, including Configuration or Topology 
Change Notification BPDUs, it will automatically set the selected interface to forced 
STP-compatible mode. However, you can also use the 

spanning-tree protocol-

migration

 command at any time to manually re-check the appropriate BPDU 

format to send on the selected interfaces (i.e., RSTP or STP-compatible).

Example 

Console#spanning-tree protocol-migration ethernet 1/5

Console#

show spanning-tree

This command shows the configuration for the common spanning tree (CST), for all 
instances within the multiple spanning tree (MST), or for a specific instance within 
the multiple spanning tree (MST).

Syntax 

show spanning-tree

 [

interface

 | 

mst

 

instance-id

]

interface

 

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

instance-id

 - Instance identifier of the multiple spanning tree.

(Range: 0-4094, no leading zeroes)

Default Setting 

None

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments