manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 491 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 491

Chapter 18

  |  Address Table Commands

–  491  –

Example 

Console(config)#mac-address-table static 00-e0-29-94-34-de interface ethernet 

1/1 vlan 1 delete-on-reset

Console(config)#

clear mac-address-

table dynamic

This command removes any learned entries from the forwarding database.

Default Setting 

None

Command Mode 

Privileged Exec

Example 

Console#clear mac-address-table dynamic

Console#

show mac-address-

table

This command shows classes of entries in the bridge-forwarding database.

Syntax 

show mac-address-table

 [

address

 

mac-address

 [

mask

]] [

interface

interface

] 

[

vlan

 

vlan-id

] [

sort

{

address

|

vlan

 | 

interface

}]

mac-address

 - MAC address.

mask

 - Bits to match in the address. 

interface

 

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1)

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

vlan-id

 - VLAN ID (Range: 1-4094) 

sort

 - Sort by address, vlan or interface. 

Default Setting 

None

Command Mode 

Privileged Exec

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments