manualshive.com logo in svg

Edge-Core ECS4120-28F, Reference Manual, Page: 186 / 938

Share
Download
Edge-Core ECS4120-28F Reference Manual Download Page 186

Chapter 5

  |  SNMP Commands

SNMP Target Host Commands

–  186  –

Example 

Console(config)#snmp-server host 10.1.19.23 batman

Console(config)#

Related Commands

snmp-server enable traps (182)

snmp-server

enable port-traps

mac-notification

This command enables the device to send SNMP traps (i.e., SNMP notifications) 
when a dynamic MAC address is added or removed. Use the no form to restore the 
default setting.

Syntax 

[

no

]

 snmp-server enable port-traps

 

mac-notification

mac-notification 

- Keyword to issue trap when a dynamic MAC address is 

added or removed.

Default Setting 

Disabled

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Command Usage 

This command can enable MAC authentication traps on the current interface only if 
they are also enabled at the global level with the 

snmp-server enable traps

 

mac-

authentication

 command.

Example 

Console(config)#interface ethernet 1/1

Console(config-if)#snmp-server enable port-traps mac-notification

Console(config)#

show snmp-server

enable port-traps

This command shows if SNMP traps are enabled or disabled for the specified 
interfaces.

Syntax 

show snmp-server enable port-traps interface

 [

interface

]

interface

 

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: Always 1) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-26) 

Summary of Contents for ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments