Edge-Core ECS4110-28T, Management Manual, Page: 834 / 1514

C
HAPTER
24
| Authentication Commands
Client
– 834 –
show radius-server
This command displays the current settings for the RADIUS server.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show radius-server
Remote RADIUS Server Configuration:
Global Settings:
Authentication Port Number : 1812
Accounting Port Number : 1813
Retransmit Times : 2
Request Timeout : 5
Server 1:
Server IP Address : 192.168.1.1
Authentication Port Number : 1812
Accounting Port Number : 1813
Retransmit Times : 2
Request Timeout : 5
RADIUS Server Group:
Group Name Member Index
------------------------- -------------
radius 1
Console#
C
LIENT
Terminal Access Controller Access Control System () is a logon
authentication protocol that uses software running on a central server to
control access to TACACS-aware devices on the network. An authentication
server contains a database of multiple user name/password pairs with
associated privilege levels for each user or group that require management
access to a switch.
Table 80: Client Commands
Command Function Mode
tacacs-server host Specifies the server and optional
parameters
GC
tacacs-server key Sets the encryption key GC
tacacs-server port Specifies the server network port GC
tacacs-server retransmit Sets the number of retries GC
tacacs-server timeout Sets the interval between sending authentication
requests
GC
show tacacs-server Shows the current settings GC