Edge-Core ECS4110-28T, Management Manual, Page: 75 / 1514

– 75 –
1
I
NTRODUCTION
This switch provides a broad range of features for Layer 2 switching and
Layer 3 static routing. It includes a management agent that allows you to
configure the features listed in this manual. The default configuration can
be used for most of the features provided by this switch. However, there
are many options that you should configure to maximize the switch’s
performance for your particular network environment.
K
EY
F
EATURES
Table 1: Key Features
Feature Description
Configuration Backup
and Restore
Using management station or FTP/TFTP server
Authentication Console, Telnet, web – user name/password, RADIUS,
Port – IEEE 802.1X, MAC address filtering
SNMP v1/2c - Community strings
SNMP version 3 – MD5 or SHA password
Telnet – SSH
Web – HTTPS
General Security
Measures
AAA
ARP Inspection
DHCP Snooping (with Option 82 relay information)
DoS Protection
IP Source Guard
PPPoE Intermediate Agent
Port Authentication – IEEE 802.1X
Port Security – MAC address filtering
Traffic Segmentation - by port designation
Access Control Lists Supports up to 512 rules, 64 ACLs,
and a maximum of 32 rules for an ACL
DHCP/DHCPv6 Client
DNS Client and Proxy service
Port Configuration Speed and duplex mode and flow control
Port Trunking Supports up to 12 trunks – static or dynamic trunking (LACP)
Port Mirroring 50 sessions, one or more source ports to one analysis port
Congestion Control Rate Limiting
Throttling for broadcast, multicast, unknown unicast storms
Random Early Detection
Address Table 16K MAC addresses in the forwarding table, 1K static MAC
addresses, 256 L2 multicast groups, 32 static ARP entries,
24 static IP routes, 8 IP interfaces
IP Version 4 and 6 Supports IPv4 and IPv6 addressing, and management