Edge-Core ECS4110-28T, Management Manual, Page: 361 / 1514

C
HAPTER
13
| Security Measures
Access Control Lists
– 361 –
but limits the checking of ToS bits (underlined in the following example) to
the leftmost three bits, ignoring the right most fourth bit.
For example, if you configured an access list to deny packets with a ToS of
7 (000011 1 0), the highlighted bit would be ignored, and the access list
would drop packets with a ToS of both 6 and 7.
P
ARAMETERS
These parameters are displayed:
◆
Type – Selects the type of ACLs to show in the Name list.
◆
Name – Shows the names of ACLs matching the selected type.
◆
Action – An ACL can contain any combination of rules which permit or
deny a packet.
◆
Source / Destination Address Type – Specifies the source or
destination IP address type. Use “Any” to include all possible addresses,
“Host” to specify a specific host address in the Address field, or “IP” to
specify a range of addresses with the Address and Subnet Mask fields.
(Options: Any, Host, IP; Default: Any)
◆
Source / Destination IP Address – Source or destination IP address.
◆
Source / Destination Subnet Mask – Subnet mask for source or
destination address. (See the description for Subnet Mask on
page 359 .)
◆
Source / Destination Port – Source/destination port number for the
specified protocol type. (Range: 0-65535)
◆
Source / Destination Port Bit Mask – Decimal number representing
the port bits to match. (Range: 0-65535)
◆
Protocol – Specifies the protocol type to match as TCP, UDP or Others,
where others indicates a specific protocol number (0-255).
(Options: TCP, UDP, Others; Default: Others)
◆
Service Type – Packet priority settings based on the following criteria:
■
Precedence – IP precedence level. (Range: 0-7)
■
DSCP – DSCP priority level. (Range: 0-63)
◆
Control Code – Decimal number (representing a bit string) that
specifies flag bits in byte 14 of the TCP header. (Range: 0-63)
Table 21: Priority Bits Processed by Extended IPv4 ACL
DSCP
Precedence ToS
7 6 5 4 3 2 1 0