Edge-Core ECS4110-28T, Management Manual, Page: 1376 / 1514

C
HAPTER
42
| CFM Commands
Link Trace Operations
– 1376 –
◆
The cross-check process is disabled by default, and must be manually
started using this command with the enable keyword.
E
XAMPLE
This example enables cross-checking within the specified maintenance
association.
Console#ethernet cfm mep crosscheck enable md voip ma rd
Console#
show ethernet cfm
maintenance-points
remote crosscheck
This command displays information about remote MEPs statically
configured in a cross-check list.
S
YNTAX
show ethernet cfm maintenance-points remote crosscheck
[ domain domain-name | mpid mpid ]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
mpid – Maintenance end point identifier. (Range: 1-8191)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
This example shows all remote MEPs statically configured on this device.
Console#show ethernet cfm maintenance-points remote crosscheck
MPID MA Name Level VLAN MEP Up Remote MAC
---- -------------------- ----- ---- ------ ------------------
2 downtown 4 2 Yes 00-0D-54-FC-A2-73
Console#
Link Trace Operations
ethernet cfm
linktrace cache
This command enables caching of CFM data learned through link trace
messages. Use the no form to disable caching.
S
YNTAX
[ no ] ethernet cfm linktrace cache
D
EFAULT
S
ETTING
Enabled