17
After selecting the ports in the Storm Control port panel, set the unknown-unicast, unknown-multicast, and
broadcast values. For example, set the port 1 unknown-unicast storm control to 1009, and then click "Apply
Settings".
Figure 4-6: Configuring Storm` Control Information
The configuration displays as shown below:
Figure 4-7: Configuration Successfully Storm Control Information Flow Control
4.3
FLOW CONTROL
Click "Port Management" and then "Flow Control" to view the port flow control information on the switch.
Figure 4-8: Flow Control Information
Summary of Contents for ECS2020 Series
Page 99: ...99 Figure 7 52 Use SSH2 Login...
Page 100: ...100 Figure 7 53 Use SSH1 Login...
Page 115: ...E022019 CS R02...