Edge-Core AS7316-26XB Quick Start Manual Download Page 1

–  1  –

Quick Start Guide

Attach the Brackets

1.

Attach each of the brackets to the router using four of the 
included bracket screws.

Mount the Router in a Rack

1.

Use the screws and cage/clip nuts supplied with the rack to 
secure the router in the rack.

Ground the Router

1.

Ensure the rack is properly grounded and in compliance with 
ETSI ETS 300 253. Verify that there is a good electrical 
connection to the grounding point on the rack (no paint or 
isolating surface treatment).

2.

Attach the grounding wire (#6 AWG) to the grounding point on 
the router’s rear panel. Then connect the other end of the wire to 
rack ground.

Connect Power

1.

Install one or two AC or DC PSUs in the router.

The router supports up to two PSUs that must have the same 
matching airflow direction as the installed fan trays.

2.

Connect an external AC or DC power source to the PSUs.

Note:

 The router has the Open Network Install 

Environment (ONIE) software installer pre-loaded on the 
router, but no switch software image. Information about 
compatible switch software can be found at 

www.edge-core.com

.

Note:

 The drawings in this document are for illustration 

only and may not match your particular model.

Caution:

 Installing the router in a rack requires two 

people. One person should position the router in the rack, 
while the other person secures it using the rack screws.

1

1

2

1

Caution:

 The earth connection must not be removed unless 

all supply connections have been disconnected.

Attention:

 Le raccordement à la terre ne doit pas être retiré 

sauf si toutes les connexions d’alimentation ont été 
débranchées.

3

2

1

4

2

1

E122019-CS-R02

150200002030A

www.edge-core.com

26-Port 25G/100G Cell Site Gateway Router

AS7316-26XB

1.

Cell Site Gateway Router AS7316-26XB

2.

Rack Mounting Kit—2 brackets and 8 screws

3.

Power cord (included with AC PSUs only)

4.

Grounding kit—grounding lug, 2 screws, and 2 washers

5.

Ring lugs (x4) (included with DC PSUs only)

6.

Power cord ties (x2) (included with AC PSUs only)

7.

Documentation—

Quick Start Guide

 (this document) and 

Safety and Regulatory Information

1

Package Contents

2

3

4

5

7

6

Reviews: