Edge-Core AS5700-54X, Cli Reference Manual, Page: 724 / 1116

Chapter 25
| Domain Name Service Commands
– 724 –
ip domain-list
This command defines a list of domain names that can be appended to incomplete
host names (i.e., host names passed from a client that are not formatted with
dotted notation). Use the
no form to remove a name from this list.
Syntax
[ no ] ip domain-list name
name - Name of the host. Do not include the initial dot that separates the
host name from the domain name. (Range: 1-127 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆
Domain names are added to the end of the list one at a time.
◆
When the switch performs as a DNS client and an incomplete host name is
received, it will work through the domain list, appending each domain name in
the list to the host name, and checking with the specified name servers for a
match.
◆
If there is no domain list, the domain name specified with the ip domain-name
command is used. If there is a domain list, the default domain name is not used.
Example
This example adds two domain names to the current list and then displays the list.
Console(config)#ip domain-list sample.com.jp
Console(config)#ip domain-list sample.com.uk
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS Disabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
Console#
Related Commands
ip domain-name (725)