Edge-Core AS5700-54X, Cli Reference Manual, Page: 583 / 1116

Chapter 22
| Multicast Filtering Commands
IGMP Snooping
– 583 –
ip igmp snooping
This command enables IGMP snooping globally on the switch or on a selected
VLAN interface. Use the
no form to disable it.
Syntax
[ no ] ip igmp snooping [ vlan vlan-id ]
vlan-id - VLAN ID (Range: 1-4094)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆
When IGMP snooping is enabled globally, the per VLAN interface settings for
IGMP snooping take precedence.
◆
When IGMP snooping is disabled globally, snooping can still be configured per
VLAN interface, but the interface settings will not take effect until snooping is
re-enabled globally.
ip igmp snooping vlan
static Adds an interface as a member of a multicast group GC
ip igmp snooping
vlan version Configures the IGMP version for snooping GC
ip igmp snooping
vlan version-exclusive Discards received IGMP messages which use a version
different to that currently configured GC
clear ip igmp snooping
groups dynamic Clears multicast group information dynamically learned
through IGMP snooping PE
clear ip igmp snooping
statistics Clears IGMP snooping statistics PE
show ip igmp snooping Shows the IGMP snooping, proxy, and query configuration PE
show ip igmp snooping
group Shows known multicast group, source, and host port
mapping PE
show ip igmp snooping
mrouter Shows multicast router ports PE
show ip igmp snooping
statistics Shows IGMP snooping protocol statistics for the specified
interface PE
Table 116: IGMP Snooping Commands
(Continued)
Command Function Mode