Edge-Core AS5700-54X, Cli Reference Manual, Page: 272 / 1116

Chapter 8
| General Security Measures
Network Access (MAC Address Authentication)
– 272 –
Command Mode
Interface Configuration
Example
Console(config-if)#mac-authentication max-mac-count 32
Console(config-if)#
clear network-access
Use this command to clear entries from the secure MAC addresses table.
Syntax
clear network-access mac-address-table [ static | dynamic ]
[ address mac-address ] [ interface interface ]
static - Specifies static address entries.
dynamic - Specifies dynamic address entries.
mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
interface - Specifies a port interface.
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#clear network-access mac-address-table interface ethernet 1/1
Console#
show network-access
Use this command to display the MAC authentication settings for port interfaces.
Syntax
show network-access [ interface interface ]
interface - Specifies a port interface.
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)