Edge-Core AS5700-54X, Cli Reference Manual, Page: 201 / 1116

Chapter 5
| SNMP Commands
Additional Trap Commands
– 201 –
show nlm oper-status
This command shows the operational status of configured notification logs.
Command Mode
Privileged Exec
Example
Console#show nlm oper-status
Filter Name: A1
Oper-Status: Operational
Console#
show snmp
notify-filter
This command displays the configured notification logs.
Command Mode
Privileged Exec
Example
This example displays the configured notification logs and associated target hosts.
Console#show snmp notify-filter
Filter profile name IP address
---------------------------- ----------------
A1 10.1.19.23
Console#
Additional Trap Commands
memory
This command sets an SNMP trap based on configured thresholds for memory
utilization. Use the
no form to restore the default setting.
Syntax
memory { rising rising-threshold | falling falling-threshold }
no memory { rising | falling }
rising-threshold - Rising threshold for memory utilization alarm expressed in
percentage. (Range: 1-100)
falling-threshold - Falling threshold for memory utilization alarm expressed
in percentage. (Range: 1-100)
Default Setting
Rising Threshold: 90%
Falling Threshold: 70%
Command Mode
Global Configuration