45
Eder Forestrytools
310003_04 | 06.2019
Checking the starting system
(without removing the
flywheel)
If the device does not start up or splutters, you can check the starting
system without removing the flywheel as follows:
>
Remove the spark plug.
>
Make contact between the removed spark plug and the
engine body.
>
Then pull the engine starter handle.
>
If the engine starts up, the starting system is in order.
If the engine does not start up or splutters:
>
Have the carburettor checked by an authorized dealer.
Decommissioning and disposal
If the device is no longer fit for use and is to be scrapped, you must
deactivate and dismantle it, i.e. you must bring the device into a state
in which it can no longer be used for the purposes for which it was
designed.
To deactivate the device, proceed as follows:
>
Empty the fuel tank and run the engine until there is no
more fuel.
When you dispose of the device or its components:
>
Observe the regulations of your country.
Storage
>
Only store the device in a dry environment.
Prepare for storage as follows:
>
Clean the device thoroughly with a dry cloth and lubricate
the metal parts.
>
Empty the fuel tank and run the engine until there is no
more fuel.
