310003_04 | 06.2019
Eder Forestrytools
44
EN
Replacing the spring
Fig. 24:
Replacing the spring
>
Remove the drum as described in "Replacing the starter
cord".
>
First remove the spring guard (
7
) and then the spring (
8
)
from its seat in the housing (
9
).
>
Lubricate the spring and insert it in its seat with its spring
guard (
7
) and washer (
3
).
Checking the spark plug
The distance between the electrodes of the spark plug must be 0.5
mm.
To keep the drive motor in good working order, you must clean and
check the spark plug at least once a week. The spark plugs of 2-
stroke engines have a relatively short service life. They must be
changed once a month if used daily.
>
Use original Eder A56 spark plugs (order no: 310121).
