background image

Catalog #70024 & 70025
Brochure No. 63-0182

Page 1 of 6

©2008 Edelbrock Corporation

Rev. 6/08

Victor Jr. Plate Upgrade Kits 

for Square Flange and Dominator Carburetors

Kit #70024 and #70025

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Edelbrock Nitrous Kit.

Failure to follow instructions will void the

warranty and may cause damage to parts and/or personal injury. If you have any questions, please call our 

Technical Hotline at: 1-800-416-

8628

, 7:00 am - 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at:

[email protected].

Thank You….
…for purchasing an Edelbrock Nitrous Oxide Injection System.

Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested, on the market today. With the use of nitrous
oxide come some important safety considerations. This manual has been written to help you during the installation and use of your Edelbrock
Nitrous System. Please read it completely before you install and use your system. Please pay close attention to the safety information at the
beginning of each section. The information contained there specifically pertains to each of the components and installation methodologies within
the section.

The Victor Jr. Plate Upgrade Kit is a kit designed to be used as an upgrade from an existing Performer RPM Nitrous System to the Victor Jr. Nitrous
System using both new and existing components. This kit comes complete with everything needed for a finished installation if you still have all
of your Performer RPM components.

70024

70025

Item #

Qty.

Description

1

1

Performer RPM Fuel Solenoid

2

1

Performer RPM Nitrous Solenoid

3

2

4AN to 1/8”NPT Blue Nitrous Tee

4

2

4AN to 1/8”NPT Red Fuel Tee

5

1

Teflon Bottle Nut Washer

6

2

6AN to ¼”NPT Blue Fitting

7

2

6AN to ¼”NPT Red Fitting

8

4

Solenoid Bracket Screws

1

2

3

4

5

6

7

8

9

10

11

12

Item#

Qty.

Description

9

1

6AN Blue Y Fitting

10

2

6AN Blue Steel Braided Hose

11

4

4AN x 3AN Blue Steel Braided Hose

12

4

4AN x 3AN Red Steel Braided Hose

13

2

Solenoid Brackets

14

Misc. Jets

15

1

6AN Bottle Nut

16

1

6AN Feed Line

14

13

15

16

IMPORTANT NOTE:

Proper installation is the responsibility of the installer.  Improper installation will void warranty and may result in poor

performance and engine or vehicle damage.

Summary of Contents for 70024







Reviews: