©2007 Edelbrock Corporation
Catalog #5644, #5654
Brochure #63-0494
Rev. 9/07- DA/mc
EDELBROCK AXLE-BACK EXHAUST SYSTEMS
For 2005-2008 Ford Mustang GT with 4.6L V8
Catalog #5644 (Aluminized), #5654 (Stainless Steel)
INSTALLATION INSTRUCTIONS
®
Please study these instructions carefully before installing your new Axle-Back Exhaust System. If you have any questions,
please contact our
Technical Hotline at: 1-800-416-8628
, 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at
.
Edelbrock Corporation , 2700 California Street, Torrance, CA 90503
Toll-Free Tech Line: 1-800-416-8628
Office: 310-781-2222
Tech E-Mail: [email protected]
DISASSEMBLY
1.
Raise rear of vehicle on flat stable surface and
support using jackstands.
2.
Use penetrating oil on OE clamps that hold
mufflers to overaxle pipe.
Loosen clamps,
remove the stock muffler isolator brackets from
frame and remove the stock muffler from
vehicle.
WARNING!!!
Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving.
Suggested tools needed for installation:
❑
13mm & 15mm deep sockets and ratchet
❑
Floor jack & jackstands
❑
Penetrating oil
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
result in poor performance and engine or vehicle damage.
ASSEMBLY
1. Install muffler assembly number #25-3233 on
driver’s side of vehicle using supplied band
clamps and the stock muffler isolators and
brackets removed in step 2 of disassembly.
2. Install muffler assembly #25-3234 on
passenger’s side of vehicle in the same manner
as left muffler.
NOTE:
The I-pipe /overaxle pipes can be
adjusted to obtain better clearance, if needed.
Qty.
Part #
Description
❑
1
25-3233
Muffler Assembly (Left Side)
❑
1
25-3234
Muffler Assembly (Right Side)
#5644 Parts List
Qty.
Part #
Description
❑
1
25-3243
Muffler Assembly (Left Side)
❑
1
25-3244
Muffler Assembly (Right Side)
#5654 Parts List
