INSTRUCTIONS FOR ENGINE PARTS REMOVAL
BEFORE CAMSHAFT INSTALLATION
1. Disconnect battery.
2. For ease of installation, keep all parts in some sort of order.
©2009 Edelbrock Corp
Brochure #63-7157
Part #7157
Rev 5/09 - AJ/mc
• PLEASE study these instructions carefully before installing your new camshaft. If you have any questions, do not hesitate to call our
Technical
Hotline at: 1-800-416-8628,
7 am - 5 pm, Pacific Standard Time, Monday-Friday.
•
CAMSHAFT:
Edelbrock Performer RPM camshafts are ground specifically for use with the corresponding Performer RPM manifold. The Performer
RPM manifold #7156, and Performer RPM camshaft #7157, are designed to work as a team to give you better driveability and performance. They
are dyno-matched and street-proven. For best results, use the Edelbrock manifold/camshaft package with the carburetor and headers we
recommend. The Performer RPM camshafts are designed for use with modified or RPM cylinder heads, #6057-59 and valve train components only.
Screw-in studs and H.P. adjustable rocker arms must be used.
NOTE:
Maximum performance is achieved only when the Edelbrock Performer RPM Power Package components are used with the following
equipment:
•
Performer RPM manifold/camshaft/timing set/valve springs
•
Performer Series carburetor #1407
•
fuel delivery system of sufficient capacity
•
1-3/4" headers
•
aftermarket/re-curved distributors
•
IMPORTANT:
This instruction sheet provides general installation guidelines which can affect your warranty. Read it carefully. It is not our intent to
cover each detail of installation here; a step-by-step procedure manual would be far too lengthy. We want to caution you that installing a camshaft
is a complicated procedure that requires a good general knowledge of automotive engines. If you are not confident that you can complete the
camshaft installation successfully, we suggest you consider having it installed by an experienced mechanic.
CAUTION:
Improper installation will result in LOW MILEAGE, POOR PERFORMANCE, COSTLY REINSTALLATION, and ENGINE DAMAGE.
TO AVOID THESE PROBLEMS YOU MUST DO THE FOLLOWING:
❏
Carefully study and understand all instructions.
❏
Examine the camshaft for possible shipping damage (if damaged contact you dealer immediately).
• TOOLS
AND
EQUIPMENT
Use the following checklist for items needed.
❏
box and open-end wrenches
❏
socket set
❏
distributor wrench
❏
pliers (channel locks & hose clamp)
❏
screw drivers (regular and phillips)
❏
torque wrench
❏
hammer
❏
gasket scraper or putty knife
❏
timing light
❏
vacuum gauge
❏
rags
❏
water bucket
❏
harmonic balancer puller
PREPARATION CHECKLIST
• HARDWARE & PARTS TO BUY
❏
Intake gaskets; OEM, Fel-Pro Print-O-Seal #1233, or equivalent
❏
pipe plugs, if needed
❏
Edelbrock Gasgacinch, #9300
❏
RTV silicone
❏
chalk
❏
paper and pencil
❏
radiator coolant
❏
teflon tape
❏
Edelbrock Performer-Link True Rolling Timing Chain and Gear Set
#7812
❏
Edelbrock Sure Seat Valve Springs, #5757
❏
Manifold bolt kit #8559
Performer RPM
Camshaft/Lifters/Lube Kit
PART #7157
MODEL: 389-455 c.i.d. Pontiac V8, 1965 & later
