Eddyfi Technologies TSC U41, User Manual

Page: 47 / 72

Assist3 Software
| 35
Measurement Units
You can use Assist3 under the US Customary (imperial) or metric system of measurement units.
To change the measurement unit system, select
Imperial
or
Metric
as appropriate. When you
do, measurement units are adjusted across the software and in your reports.
Company Logo
You can select an alternative image to use on reports to replace the default Eddyfi logo. If you
are using ASSIST Go on the Amigo2:
1. On a USB stick, create a folder in the root called “ASSIST\UserData”. Copy your logo file
into this folder.
2.
Plug the USB stick in the QUICK COPY USB port of the Amigo2.
3.
Press the
QUICK COPY
button on the side of the Amigo2.
4.
Tap
Select Company Logo
.
5. Select the logo file, and then tap OK.
Figure 4-7
Company logo
If you are using a version of ASSIST on a PC:
1.
Click the Select
Company Logo button
. The default location is a folder named ASSIST\
UserData.
2.
Navigate to the folder containing the desired image file.
3.
Select the logo file, and then tap OK.