Eddyfi Technologies TSC U41, User Manual

Page: 21 / 72

System Overview
| 9
U41 subsea bottle network settings
From the Backstage/General tab, configure the U41 bottle by pressing the Connect button.
Figure 1-7
Software - Subsea bottle configuration
Then from the dialogue like the one shown below, select the ‘U41 – Ethernet’ instrument and
click the Config Cog.
Figure 1-8
Software - Subsea bottle Ethernet configuration
A dialogue similar to the one shown below should appear.
Figure 1-9
Software - Subsea bottle IP mode configuration
Select the required IP Mode from the list according to the scenario and table above.