Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 38 of 57
User Ma
nual
Laser Scanner Mount
If your is equipped with an optional ULS-100 laser scanner module, it can be centered in the pipe by
adjusting the quick-release pin at the base of the linkage.
Mount the adjustable arm for the ULS-100 scanner to the underside of the main camera mounting block
using the M6 x 16 mm SHCS
. Bolt the laser scanner with its mounting brace to the “L” shaped bracket at
the end of the adjustable arm using M5 x 20 mm SHCS. The scanner must connect to the harness block
through the power conversion can which drops the voltage from 48 VDC to 24 VDC. Run the cable
through the top of the linkage (not between the links) and secure using P-clips.
M6x16mm
SOCKET CAP SCREW
