Versatrax 150™
Document: UMDW014058.docm
Revision: A03
Created by: KW
Date: 10 Oct 2019
3075415-A03
Source Location: C:\ePDM\ISLEng\products\dw-versatrax150mkii\manuals\UMDW014058.docm
Page 26 of 57
User Ma
nual
Light Installation
Light Mount When Using Standard Length Tracks
The 901 lights are installed onto the camera mount plate via mounting bracket as follows:
1. If the 901 mounting brackets are not installed, attach them to the back of the camera mount plate
using:
a. Older blue anodized chassis
’ use ¼-20 x
5
/
8
in SHCS
b. Hard gray anodized chassis use M6 x 16 mm SHCS
2. Attach the lights to the front of the brackets using 2x M5 x 16 mm SHCS each.
3. Connect the whips to connector on the back of the lights, grease both the male and female
connectors with a dab of silicone grease.
4. Make sure the whips are routed properly through their P-clamps as shown (automatic camera
raise routing shown).
M6x16mm
SHCS
(ALL)
GRAY: M6x16mm SHCS
BLUE: ¼-
20 x 5/8” SHCS
GRAY: M5x8mm
SHCS BLUE: #10-24
x 3/8
